Owner’s
Manual
Wine Reserve
ZDWR240
Consumer Information
Wine Reserve
The warranty does not cover damage
caused after delivery.
Immediately contact the dealer (or builder)
that sold you the wine reserve.
If you received
a damaged
appliance
Save time
& money
Before you request service, check the
Problem Solver in the back of this manual.
It lists causes of minor operating problems
that you can correct yourself.
Before using, be sure all packing materials
and tape have been removed.
appliances is an application of household
liquid detergent. Apply with a soft cloth
and allow to soak. Wipe dry and then apply
an appliance polish to thoroughly clean
and protect the surface.
Remove
packaging
To assure no damage is done to the finish
of the product, the safest way to remove the
adhesive left from packaging tape on new
To obtain service, see the Consumer
For customers in Canada:
If you need
service
Services page in the back of this manual.
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
We are proud of our service and want you
to be pleased. If for some reason you are
not happy with the service you receive,
here are steps to follow for further help.
NEXT, if you are still not pleased, write
all the details—including your phone
number to:
For customers in the USA:
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
Manager, Consumer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
NEXT, if you are still not pleased, write
all the details—including your phone
number—to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
• Promptly inspect your new Monogram
wine reserve. If it has been damaged,
contact the Installer or Dealer
immediately.
• Test the door swing. Carefully open and
close the door. The door should not rub
or catch on adjacent cabinetry. Notify the
installer if the door makes contact with
cabinetry.
After
installation
is completed
• This wine reserve must be properly
leveled to ensure correct door alignment
and door closure. Contact the Installer
if the unit is not level.
Please Contact the Installer or Dealer if you
experience any of these problems.
Your wine reserve is shipped with a black
toekick on the front of the unit. For
shipping purposes, an optional stainless
steel toekick is secured to the back of the
unit. That toekick should have been
removed and installed, or given to you.
Keep the unused toekick and other unused
• The unit should be centered in the
opening. The front face of the door
should be 1″ forward of adjacent
cabinetry. Contact the installer if
clearance is not correct.
or removed parts for possible future use.
3
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
BEFORE IT IS USED, THE APPLIANCE MUST BE PROPERLY INSTALLED
AND LOCATED AS DESCRIBED IN THIS MANUAL.
wDANGER: RISK OF CHILD ENTRAPMENT
Child entrapment and suffocation are
Before You Throw Away Your Old
not problems of the past. Junked or
abandoned refrigeration products are
still dangerous…even if they will sit for
“just a few days.” If you are getting rid of
your old appliance, please follow these
instructions to help prevent accidents.
Refrigeration Product:
• Take off the doors.
• Leave the shelves in place so that
children may not easily climb inside.
REFRIGERANTS
All refrigeration products contain
If you are getting rid of an old refrigeration
product, check with the company handling
the disposal about what to do.
refrigerants, which under federal law must
be removed prior to product disposal.
DO NOT USE AN ADAPTER PLUG OR EXTENSION CORD
(Adapter plugs not permitted in Canada)
Do not use an adapter plug to connect the
refrigerator to a 2-prong outlet.
Do not use an extension cord with this
appliance.
4
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
LIRE ET CONSERVER CES INSTRUCTIONS
AVANT D’ETRE UTILISÉ, L’APPAREIL MÉNAGER DOIT ETRE BIEN
INSTALLÉ ET SE TROUVER À L’ENDROIT DÉCRIT DANS CETTE MANUEL.
wDANGER! RISQUES POUR LES ENFANTS
Les enfants pris au piège ou morts
Avant de vous débarasser de votre vieux
d’asphyxie sont toujours d’actualité.
Les appareils de réfrigération abandonés
sont toujours aussi dangereux, même si
on n’attend que “quelque jours” pour
s’en débarasser. Si vous ne gardez pas
votre ancien appareil, veuillez suivre les
directives ci-dessous afin de prévenir
les accidents.
appareil de réfrigération :
• Démontez les portes.
• Laissez les clayettes en place afin
d’empêcher les enfants de grimper
à l’intérieur.
RÉFRIGÉRANTS
Tous les appareils de réfrigération
contiennent des refrigerants qui,
conformément aux lois fédérales, doivent
être enlevés avant toute élimination de
l’appareil.
Si vous vous débarrassez de vieux appareils
de réfrigération, vérifiez, auprès de la
société qui s’occupe de leur élimination,
ce que vous devez faire.
NE PAS UTILISER DE FICHE D’ADAPTATION OU
DE CORDON PROLONGATEUR
(Fiches d’adaptation non permises au Canada)
N’utilisez pas de fiche d’adaptation pour
brancher le réfrigérateur dans une prise à
2 broches.
N’utilisez pas de cordon prolongateur avec
cet appareil.
5
IMPORTANT SAFETY INSTRUCTIONS
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or
remove the third (ground) prong from
the power cord. For personal safety, this
appliance must be properly grounded.
The appliance should always be plugged
into its own individual electrical outlet
which has a voltage rating that matches
the rating plate. This provides the best
performance and also prevents overloading
house wiring circuits which could cause
a fire hazard from overheated wires.
The power cord of this appliance is
equipped with a 3-prong (grounding)
plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the
possibility of electric shock hazard from
this appliance.
Never unplug an appliance by pulling on
the power cord. Always grip the plug firmly
and pull straight out from the outlet.
Have the wall outlet and circuit checked
by a qualified electrician to make sure
the outlet is properly grounded.
Repair or replace immediately all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows
cracks or abrasion damage along its length
or at either end.
Where a standard 2-prong wall outlet
is encountered, it is your personal
responsibility and obligation to have
it replaced with a properly grounded
3-prong wall outlet.
When moving the appliance, be careful not
to roll over or damage the power cord.
SAVE THESE INSTRUCTIONS
6
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
RACCORDEMENT ÉLECTRIQUE
Ne coupez ni retirez en aucun cas la
Cette précaution est recommandée pour
garantir un rendement optimum et éviter
une surcharge des circuits électriques de la
résidence, ce qui pourrait créer un risque
d’incendie par surschauffe des fils.
troisième broche (mise à la terre) de la
fiche du cordon d’alimentation. Pour
votre sécurité, cet appareil doit être
correctement mis à la terre.
Le cordon d’alimentation de cet appareil
est muni d’une fiche à 3 broches (mise à la
terre) qui se branche dans une prise mural
ordinaire à 3 alvéoles (mise à la terre)
pour réduire au minimum les risques du
chocs électriques.
Ne débranchez jamais l’appareil en
tirant le cordon d’alimentation. Saisissez
fermement la fiche du cordon et tirez
droit pour la retirer de la prise.
Réparez ou remplacez immédiatement tout
cordon effiloché ou endommagé. N’utilisez
pas un cordon fendillé ou présentant des
Faites examiner la prise de courant et le
circuit par un électricien qualifié pour vous signes d’usure.
assurer que la prise est correctement mise
Lorsque vous déplacez l’appareil du mur,
à la terre.
faites attention de ne pas la faire rouler sur
le cordon d’alimentation afin de ne pas
l’endommager.
Si la prise murale est du type standard
à 2 alvéoles, il vous incombe de la faire
remplacer par une prise à 3 alvéoles
correctement mise à la terre.
La machine à glaçons doit toujours être
branché dans sa propre prise de courant,
dont la tension nominale est identique à
celle indiquée sur la plaque signalétique.
CONSERVEZ CES DIRECTIVES
7
Controls and Features
Wine Reserve
Temperature
control
The temperature range of the wine reserve
is from 40°F to 65°F.
The CUSTOM setting will provide a storage
temperature range of 40°F to 65°F. This
setting provides the ability to customize the
temperature to the optimum setting for the
particular wine. To change the temperature
setting, press and hold the CUSTOM pad
until the display begins to flash the set
Do not install the wine reserve where the
temperature will go below 55°F or above
90°F.
The temperature display shows the actual
temperature of the wine reserve. The actual temperature. Then press the + or – pads
temperature may vary slightly from the set
temperature based on factors such as door
openings, amount of wine and room
temperature. After making adjustments,
allow 12 to 24 hours for the wine reserve
to reach the temperature you have set and
before making any further adjustments.
The factory setting is the RED WINE setting
(55°F).
until you reach the desired set temperature.
Once you reach the desired temperature,
stop pressing the pads. After several
seconds, the display will return to the
actual temperature. The actual temperature
will be displayed while the wine reserve
moves toward the set temperature.
In general, temperatures at the bottom
of the cabinet will be cooler than
temperatures at the top of the cabinet.
Note: On all three temperature selections,
the light beside the pad will remain lit,
indicating the selection made.
Position your wine inventory accordingly
(i.e., white wines in the cooler zones and
red wines in the warmer zones).
The RED WINE setting will provide a
storage temperature of approximately
55ºF, which is optimum for the storage
of red wine. Press the RED WINE pad to
display 55°F. Several seconds after the
RED WINE pad is pressed, the actual
temperature will be displayed while the
wine reserve temperature moves toward
55°F.
The WHITE WINE setting will provide a
storage temperature of approximately 45ºF,
which is optimum for white wine. Press the
WHITE WINE pad to display 45°F. Several
seconds after the WHITE WINE pad is
pressed, the actual temperature will be
displayed while the wine reserve
temperature moves toward 45°F.
This child control lockout feature prevents After the desired temperature is set the
Child control
lockout
unwanted changes to your temperature
settings.
temperature can be locked. To lock, press
both the + and – pads at the same time for
five seconds. To unlock, press both + and –
pads for five seconds.
8
Controls and Features
Wine Reserve
The interior light makes it easy to view
your wine labels and enhances the display
of your collection.
For best viewing, do not store a bottle
on the top shelf directly under the light.
Remember to turn off the light when it
is no longer needed.
Interior light
and light pad
When the light pad is pressed and the word
ON is displayed, the light will remain on for
one hour before automatically turning off.
When the light pad is pressed and the word
OFF is displayed, the light will come on
only when the door is opened.
All of the full extension drawers pull out
so bottles can be conveniently added or
removed.
Removing
full extension
drawers
Tab (push tab down on
right drawer guide, pull
tab up on left drawer
guide)
Any of the full extension drawers can be
removed to store larger bottles.
To remove:
1. Pull the full extension drawer out to the
STOP position.
Appearance may vary
2. Push the tab on right drawer guide down
while pulling the tab on left guide up,
and pull the drawer out.
To replace:
1. Push the drawer slide arm back into
To replace, push drawer slide
arm back into unit
Pull small slide sub assembly
completely forward
the unit.
2. Pull the small slide sub assembly
NOTE: Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times to make sure
locking tabs are properly engaged.
completely forward.
3. Insert the sides of the drawer back into
the guides.
4. Push until the tabs lock into place.
9
Controls and Features
Wine Reserve
The top five full extension drawers each
hold eight bottles, two deep with the necks
alternating front to back or nine bottles,
alternating with necks pointing inward.
The bottom two full extension drawers
hold six bottles each and are loaded with
necks facing the rear. Tall bottles should
not be loaded on the bottom drawer
because they may prevent the door from
closing.
Insert wine
bottles
8 bottle arrangement
9 bottle arrangement
Bottom drawer
• The bottles on the top full extension
• Do not allow children to climb, stand or
hang on the wine reserve full extension
drawers. They could seriously injure
themselves and possibly cause damage
to the wine reserve.
Loading
tips and
suggestions
drawer, directly under the light, will be
exposed to a slightly higher temperature
when the light is on. Position your wines
accordingly and remember to turn off
the light when it is no longer needed.
• In general, temperatures at the bottom
of the cabinet will be cooler than
temperatures at the top of the cabinet.
• Keep wines that you plan to use for
everyday drinking and entertaining on
the front half of the full extension
drawers where labels are completely
visible. Place wines for aging or longer
term storage in the rear.
• Position your wine inventory accordingly
(i.e., white wines in the cooler zones and
red wines in the warmer zones).
The full extension drawer fronts on the
wine reserve are unfinished cherry wood.
During use, oil from hands may accumulate
and stain the wood.
• Apply the stain and sealer according to
the manufacturer’s instructions. To avoid
unpleasant odor, keep the door open to
ventilate and allow the stain/sealer to dry
completely before using the product.
Wood drawer
fronts
• The drawer fronts may be stained and
sealed to match adjacent cabinetry. The
tinted glass will make the stained wood
appear darker. A true color match can be
seen only when the door is opened.
NOTE: Natural wood may vary slightly in
grain and color.
10
Care and Cleaning
Wine Reserve
Unplug the wine reserve before cleaning. If the unit is in a built-in location,
remove power at the circuit breaker.
For your
safety
Unplug the wine reserve before cleaning.
If the unit is in a built-in location, remove
power at the circuit breaker. Use a slightly
damp cloth or sponge when cleaning
around switches, lights or controls.
Other parts of the wine reserve center
unit—including the door gaskets, and
full extension drawers—can be cleaned
the same way.
Cleaning
the inside
Use warm water and baking soda solution—
about a tablespoon (15 ml) of baking soda
to a quart (1 liter) of water. This both
cleans and neutralizes odors. Thoroughly
rinse and wipe dry.
Periodically check the drain hole and
channel for any debris. If the drain is
blocked, condensation will not drain
properly.
Drain hole
Drain hole
To check and clean the drain hole,
remove the third and fourth drawers
(see instructions on Removing full extension
drawers). Sweep a damp cloth along the
channel in the back of the wine reserve.
Use a finger to sweep away any debris
from the drain hole.
Appearance may vary
The exterior surfaces can be washed with
mild soap and water.
Do not use scouring pads, powdered
cleaners, bleach or cleaners containing bleach
because these products can scratch and
damage the finish.
Cleaning
the outside
Rinse thoroughly with clear water. Never
use abrasive scouring powders.
Warranty does not cover damage due to
improper cleaning methods.
Use a glass cleaner or mild soap and water
and a soft cloth to clean the glass door.
Do not use any abrasive powders.
Avoid cleaning cold glass with hot water
because the extreme temperature
difference may cause it to break. Rough
handling of tempered glass can cause it
to shatter.
Glass door
Door gasket
The vinyl gasket may be cleaned with mild
soap and water, a baking soda solution or
a mild scouring powder. Rinse well.
After cleaning the door gasket, apply a thin
layer of paraffin wax or petroleum jelly to
the door gasket at the hinge side. This
helps keep the gasket from sticking and
bending out of shape.
11
Care and Cleaning
Wine Reserve
Unplug the wine reserve before cleaning. If the unit is in a built-in location,
remove power at the circuit breaker.
For your
safety
Unplug the wine reserve before replacing
the light bulb. If the unit is in a built-in
To remove the light shield, push in the tab
on the left side of the shield and lower it.
Light bulb
replacement
location, remove power at the circuit breaker. Replace with a 15 watt appliance bulb.
If the power fails, open the door as
infrequently as possible to maintain
the temperature. A gradual rise in
temperature should not have any
adverse effect on the wine.
If it is extremely hot, you may want to move
the wine to the coolest location you can
find until power is restored.
In the event
of a power
failure
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
Secure all loose items such as drawers by
taping them securely in place to prevent
damage.
Be sure the wine reserve stays in an upright
position during moving.
Preparing
to move
12
Built-In Dimensions
Wine Reserve
The wine reserve can be a free-standing
model or can be built in using the cut-out
dimensions below.
When building in the wine reserve, be sure
to allow for a full door swing so you have
full access to the pull-out drawers.
Installation
dimensions
See the Installation Instructions (Pub. No.
49-60210) for complete directions.
233/4″
(603 mm)
233/4″
(603 mm)
341/2″
(876 mm)
Product dimensions:
NOTE:
Cut-out dimensions:
Height: 341/2″ (876 mm) Handle and
Width: 233/4″ (603 mm) handle standoff
Depth: 233/4″ (603 mm) depth is 13/4″
Height: 341/2–35″ (876–889 mm)
Width: 233/4″ (603 mm) minimum
Depth: 24″ (610 mm)
The wine reserve is factory set for a 110°
door swing.
10" Minimum
to Wall
Product
clearances
90° Door Swing
When installed in a corner:
21-5/8"
• Allow 4″ minimum clearance on the
hinge side for the 90° door swing and
to allow racks to slide out.
23-5/8"
• Allow 10″ minimum clearance on the
hinge side for a full 110° door swing.
90°
110°
• The door swing is reversible on all models.
If desired, change the door swing before
installation.
4" Minimum
to Wall
Choose the location:
Black or Stainless Steel Toekick Options
• These products may be closed in on the
top and three sides as long as the front
is unobstructed for air circulation and
proper access to the door.
These products are shipped with a black
toekick installed. An optional stainless steel
toekick is also supplied with each product.
For shipping purposes, the stainless steel
toekick is secured to the back of the unit.
• Do not install these products where the
temperature will go below 55°F (13°C)
or above 90°F (32°C).
• Do not install where it will be subject to
direct sunlight, heat or moisture.
13
Reversing the Door Swing
Wine Reserve
Parts included:
To reverse
the door
Install
3 Hinge
Screws
1. Top left case hinge
2. Bottom left case hinge
Remove
Top Hinge
3. Left and right side decorative
hinge cover
4. Decorative hinge screw hole cover
Hinge
Pin and
Bracket
®
5. Torx driver bit
Door Stop
and Cam Riser
Tools required:
1. Phillips screwdriver
2. Electric drill
To remove the door:
Remove
Hinge
1. Flatten the shipping carton to use as
a pad.
2. Remove the 2 screws and the toekick.
Set aside the screws and toekick for final
installation.
3. Place the door onto the bottom case
hinge.
4. Install the supplied left-hand top case
®
3. Use the supplied Torx bit and electric
hinge with the 3 original screws.
drill to remove the 3 screws holding the
top case hinge. Lift off the hinge. (Screws
will be used to install the new hinge.)
5. Select the hinge cover marked with
an “L”.
6. Peel backing off the tape inside the
4. Lift the door off the bottom case hinge.
decorative hinge cover.
5. Remove the bottom case hinge pin and
Install Covers
7. Press and snap the
hinge cover into
place.
bracket.
Rotate the door:
The handle will be on the right side of the
door; hinges will be installed on the left
side of the case.
8. Snap the screw hole
cover into place on
the opposite side.
1. Remove the doorstop and cam riser on
Important: Check to be sure screws are
the original bottom right side of the door. tight and that the door is straight and does
not sag. The door should swing freely.
2. Remove the fill plug on the top right side
of the door.
NOTE: See Installation Instructions to
apply hinge cover and screw hole cover.
3. Turn the door over and reinstall the
fill plug on the new left side.
Position nameplate:
To reinstall the door:
Apply the Monogram nameplate on the
door using the template included in the
installation instructions.
1. Install the original door stop and cam
riser onto the bottom left side of the
door.
2. Install the new supplied bottom case
hinge pin and bracket onto bottom
left side.
14
The Problem Solver
Wine Reserve
Newer appliances sound different from older appliances. Modern appliances have more
features and use newer technology.
Normal
operating
sounds
Do you hear what I hear? These sounds are normal.
HUMMM...
WHOOSH...
• The new high efficiency compressor
may run faster and longer than your
old appliance and you may hear a
high-pitched hum or pulsating sounds
while it is operating.
• You may hear the fans spinning at
high speeds. This happens when the
appliance is first plugged in, when the
door is opened frequently or when large
amounts of beverages are added to
the appliance. The fans help maintain
desired temperatures.
• Sometimes the appliance runs for an
extended period, especially when the
doors are opened frequently.
• If the door is open for over 3 minutes,
you may hear a fan come on in order to
cool the appliance.
• You may hear a whooshing sound when
the doors close. This is due to pressure
equalizing within the appliance.
• The fans change speeds in order to
provide optimal cooling and energy
savings.
CLICKS, POPS,
CRACKS and CHIRPS
WATER SOUNDS
• You may hear cracking or popping sounds
when the appliance is first plugged in.
This happens as the appliance cools to
the correct temperature.
• The flow of refrigerant through the
appliance cooling coils may make a
gurgling noise like boiling water.
• Expansion and contraction of cooling
coils during and after defrost can cause
cracking or popping sounds.
• A water dripping noise may occur as
water from the evaporator flows into
the drain pan.
• The electronic control board may cause
a clicking sound when relays activate to
control appliance components.
• Closing the door may cause a gurgling
sound due to pressure equalization.
15
The Problem Solver
Wine Reserve
PROBLEM
POSSIBLE CAUSE
Questions?
Use this
problem
solver!
APPLIANCE
DOES NOT OPERATE
• Appliance is so quiet that most of the time you will hear low or no
operating noise.
• Appliance may be in defrost cycle when compressor motor does not
operate for up to 2 hours.
• If interior light is not on, appliance may not be plugged in at
wall outlet. Push the plug completely into the wall outlet.
• The fuse is blown/circuit breaker is tripped. Replace fuse or reset
the breaker.
VIBRATION OR
• Adjust the leveling legs as shown in the Installation Instructions.
RATTLING (Slight
vibration is normal.)
COMPRESSOR
• Normal when appliance is first plugged in. Wait 24 hours for the
appliance to completely cool down.
MOTOR OPERATES
FOR LONG PERIODS
OR CYCLES ON AND
OFF FREQUENTLY
• Often occurs when large amounts of beverages are placed in appliance.
This is normal.
• Door left open or package holding door open.
• Hot weather or frequent door openings. This is normal.
• Temperature control set at the coldest setting.
See Temperature Control. Allow 24 hours for temperature to change.
COMPARTMENT
TOO WARM
• Temperature control not set cold enough.
See Temperature Control. Allow 24 hours for temperature to change.
• Warm weather or frequent door openings.
• Door left open for long time.
• Package may be holding door open.
APPLIANCE
HAS ODOR
• Interior needs cleaning. See Care and Cleaning.
• Keep open box of baking soda in appliance; replace every 3 months.
DOOR NOT
CLOSING
• Door gasket is sticking or folding over. Apply petroleum jelly
or paraffin wax to the face of the gasket.
PROPERLY
• The door is hitting an internal component inside the appliance.
Adjust interior components to prevent interference.
MOISTURE FORMS
ON OUTSIDE OF
APPLIANCE
• Not unusual during periods of high humidity. If bothersome,
wipe surface dry; otherwise, moisture will evaporate in time.
• Door left open or package holding door open.
FROST OR MOISTURE • Too frequent or too long door openings.
COLLECTS INSIDE
• In humid weather, air carries moisture into appliance when door
is opened. Unit will dissipate moisture in time. If bothersome,
wipe surface dry.
• Temperature control set at coldest setting.
INTERIOR LIGHT
DOES NOT WORK
• No power at outlet.
• Light bulb needs replacing. See Care and Cleaning.
16
The Problem Solver
Wine Reserve
PROBLEM
POSSIBLE CAUSE
Questions?
Use this
problem
solver!
HOT AIR FROM
BOTTOM OF
APPLIANCE
• Normal air flow cools the motor. In the refrigeration process,
it is normal that heat be expelled in the area under the appliance.
Some floor coverings are sensitive and will discolor even at these
safe and normal temperatures.
APPLIANCE
• Adaptive defrost keeps compressor running during door openings.
This is normal. The appliance will cycle off after the door remains
closed for two hours.
NEVER SHUTS OFF
BUT TEMPERATURES
ARE OK
• Normal operation in extreme temperatures.
TEMPERATURE
• Temperature may be in lockout mode. Press both + and – pads for
WILL NOT ADJUST
5 seconds to unlock the temperature.
17
Wine Storage and Handling Notes
Wine Reserve
18
Consumer Services
Wine Reserve
With the purchase of your new Monogram appliance, receive the
assurance that if you ever need information or assistance from GE,
we will be there. All you have to do is call—toll-free!
Whatever your question about any Monogram major appliance, GE Answer Center®
information service is available to help. Your call—and your question—will be answered
promptly and courteously. And you can call any time. GE Answer Center® service is open
24 hours a day, 7 days a week.
GE Answer
Center®
In the USA:
800.626.2000
OR
Visit our Website at: www.monogram.com
In Canada, call 1.888.880.3030.
A GE consumer service professional will provide expert repair service, scheduled at a time that’s
convenient for you. Many GE Consumer Service company-operated locations offer you service
today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m. to 2:00 p.m.
Saturdays). Our factory-trained technicians know your appliance inside and out—so most repairs
can be handled in just one visit.
In-Home
Repair Service
In the USA:
800.444.1845
In Canada:
1.888.880.3030
GE offers Braille controls for a variety of GE appliances, and a brochure to
assist in planning a barrier-free kitchen for persons with limited mobility.
For Customers
With Special
Needs…
Consumers with impaired hearing or speech who have access to a TDD or
a conventional teletypewriter may call 800.TDD.GEAC (800.833.4322)
to request information or service.
In the USA:
800.626.2000
You can have the secure feeling that GE Consumer Service will still be there after your warranty
expires. Purchase a GE contract while your warranty is still in effect and you’ll receive a substantial
discount. With a multiple-year contract, you are assured of future service at today’s prices.
Service
Contracts
In the USA:
800.626.2224
In Canada:
1.888.880.3030
Individuals qualified to service their own appliances can have parts or accessories sent directly
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine
Renewal Parts are fully warranted. VISA, MasterCard and Discover cards are accepted.
Parts and
Accessories
User maintenance instructions contained in this manual cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
In the USA:
800.626.2002
In Canada:
1.888.880.3030
19
Warranty
Wine Reserve
YOUR MONOGRAM WINE RESERVE WARRANTY
Staple sales slip or canceled check here. Proof of original purchase date
is needed to obtain service under warranty.
FULL ONE-YEAR WARRANTY
For one year from date of original purchase, we will provide, free of charge, parts and service labor in
your home to repair or replace any part of the wine reserve that fails because of a manufacturing defect.
WHAT IS
COVERED
From the Date
of the Original
Purchase
FULL FIVE-YEAR WARRANTY
For five years from date of original purchase, we will provide, free of charge, parts and service labor
in your home to repair or replace any part of the sealed refrigerating system (the compressor,
condenser, evaporator and all connecting tubing) that fails because of a manufacturing defect.
This warranty is extended to the original purchaser and any succeeding owner for products
purchased for ordinary home use in the 48 mainland states, Hawaii, Washington, D.C. or Canada.
In Alaska the warranty is the same except that it is LIMITED because you must pay to ship the
product to the service shop or for the service technician’s travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized Customer
Care® servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, in the USA call
800.444.1845. In Canada: 888.880.3030.
• Service trips to your home to teach you
how to use the product.
• Improper installation, delivery or
maintenance.
WHAT IS NOT
COVERED
• Replacement of house fuses or resetting of
circuit breakers.
If you have an installation problem, contact
your dealer or installer. You are responsible
for providing adequate electrical, plumbing
and other connecting facilities.
• Damage to the product caused by accident,
fire, floods or acts of God.
• Loss of food due to spoilage (in the USA only).
• Failure of the product if it is used for
other than its intended purpose or used
commercially.
• Incidental or consequential damage caused by
possible defects with this appliance.
• Replacement of the light bulbs.
• Damage caused after delivery.
Some states/provinces do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state/province
to province. To know what your legal rights are in your state/province, consult your local or
state/provincial consumer affairs office or your state’s Attorney General.
Warrantor in USA: General Electric Company,
Louisville, KY 40225
Warrantor in Canada: Camco Inc.
197D5891P005
49-60309-2
03-04 JR
Printed in Slovenia
|